Bottom painting is a regular, messy part of owning a boat. Nica Waters walks through the six steps she and Jeremy follow to get Calypso’s bottom ready to splash.
The 6 Steps
- Prep the bottom. Scrub off growth (a drywall sanding screen on a pole works well, with a pressure washer keeping the hull wet) and scrape and sand any flaking paint. If you’re changing paint types without stripping the old paint, check that the new paint is compatible with the old.
- Choose your paints: one for the hull and one for metal such as the prop. Prices vary with the amount of biocide (usually copper), and different paints work better in different waters. An inexpensive high-copper paint works for them in the Chesapeake, since they haul every other year.
- Prep the metal for its own antifouling. Regular bottom paint does nothing on a bronze prop or fittings.
- Tape off what you don’t want painted, in two rounds: first for the metal, then for the hull.
- Paint the metal first, so any overspray lands on hull that’s about to be painted, and you never have to pull tape off fresh bottom paint.
- Paint the hull. One person rolls and one brushes the spots a roller can’t reach. Follow the can’s instructions; they let each coat dry overnight and give it another day or two before launching.
Nica’s Extra Tips
- Buy enough paint and use it all. They buy 2 gallons and aim for two full coats.
- Hit high-wear areas first on day 2: the leading edges, the waterline, and around the prop.
- Taping the waterline: Nica uses 3M Fine Line tape. It isn’t cheap, and she pulls it within 2 days so it doesn’t take paint with it.
- Plan for the spots under the stands and blocks. Most yards won’t let you move stands yourself, and whether you can paint those spots in the slings depends on the yard and the weather.
Safety note: Antifouling bottom paint is a pesticide, and the dust from sanding it is toxic. Wear a disposable coverall, gloves, eye protection, and a respirator rated for paint dust and vapors (Nica admits they should have worn respirators too), and follow your yard’s rules on sanding and tarps. Switching from ablative to hard paint? Here’s how Carolyn prepped her bottom for the change.
Links:
Drywall sanding screens (Amazon)
Drywall pole sander head (Amazon)
Pole for the sander head (Amazon)
Tyvek coveralls (Amazon)
Electric pressure washer (Amazon)
3M half-face respirator (Amazon) (order extra filters, too!)
Prefer to read? Check out 6 Steps to a Clean Bottom.
The Podcast Has Wrapped Up
We’re no longer recording new episodes, but every episode here stays up for you to listen to anytime. To keep getting a weekly dose of real cruising life (boat projects, provisioning, passages, and the day-to-day of living aboard), sign up for The Boat Galley newsletter. It comes every Wednesday.
Click to see all podcast sponsors, past and present.
Music: “Slow Down” by Yvette Craig
Some links in this article (including all Amazon links) are affiliate links, meaning that we earn from qualifying purchases.





